Beam clamps
Malleable cast iron
For securing to beams without drilling or welding for: sprinkler systems, heating, ventilation and air-conditioning systems, acoustics systems, electrical, piping and sanitation fittings, engineering and steel structures.
- As far as possible, VdS, FM and UL certified
- Full range for M6 – M16 threaded rods from stock
- Inch thread on request
- Distances between jaws from 18 – 45 mm
- Please also note “Product benefits” information sheet
PACKAGING:
50 pcs in box or acc. to customer specification / TKC: 20 pcs in box
MATERIAL:
Malleable cast iron body, general tolerances acc. to DIN EN ISO 8062-3 CT8
/ TKC: steel casting GS-60
SCOPE OF SUPPLY:
Mounted with DIN 933 8.8 hex bolt, end with cup point (CP) acc. to EN ISO 4753 and DIN 439 lock nut
SURFACE FINISH:
Zinc-plated acc. to DIN EN ISO 4042, on request hot-dip galvanised acc. to DIN EN ISO 1461, or also coated with zinc flake (e.g. Geomet)
| Model | A (ca. mm) |
B (ca. mm) |
C (ca. mm) |
D | E (ca. mm) |
F (ca. mm) |
G (ca. mm) |
H (ca. mm) |
Weight (ca. g) |
Rated load (N) |
Certificates |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TKN 8 | 21 | 19 | 35 | M8/ø 9 | 35 | M8 | 18 | 38 | 85 | 1200 | VdS, UL |
| 21 | 19 | 35 | M6/ø 7 | 35 | M8 | 18 | 38 | 85 | 1200 | UL | |
| TK 10 | 29 | 21 | 45 | M8/ø 9 | 41 | M10 | 23 | 50 | 145 | 2500 | VdS, UL |
| 29 | 21 | 45 | M6/ø 7 | 41 | M10 | 23 | 50 | 145 | 2500 | UL | |
| TKN 10 | 23 | 21 | 42 | M10/ø 11 | 41 | M10 | 20 | 44 | 143 | 2500 | VdS, UL, FM |
| TK 12 | 32 | 23,5 | 54 | M12/ø 13 | 48 | M10 | 26 | 58 | 216 | 3500 | VdS, UL, FM |
| TK 16 | 26 | 29,5 | 58 | M10, M12, M16 / ø 13, ø 17 |
55 | M12 | 28 | 58 | 335 | 5500 | VdS, UL, FM |
| TKC * | 44 | 55 | 78 | ø 13 | 59 | M12 | 45 | 71 | 551 | 3500 | - |
*Please note the different packaging unit and the different materials.
Fig. shows TKC
APPLICATIONS
Our type TK and TKN beam clamps can be fixed with the pull direction against the set screw or against the lower jaw. Please see our installation instructions for further information.
All of the dimensions stated above are approximate and may deviate both upwards and downwards.