Beam clamps

Malleable cast iron

Fig. shows TK12

For securing to beams without drilling or welding for: sprinkler systems, heating, ventilation and air-conditioning systems, acoustics systems, electrical, piping and sanitation fittings, engineering and steel structures.

» Where possible, VdS, FM and UL certified
» Full range for M6 – M16 threaded rods from stock
» Inch thread on request
» Clamping widths from 18 – 45 mm
» Please also note “Product benefits” information sheet

Model
A
(ca. mm)
B
(ca. mm)
C
(ca. mm)
D
E
(ca. mm)
F
(ca. mm)
G
(ca. mm)
H
(ca. mm)
Weight
(ca. g)
Rated load
(N)
Certificates
TKN 8 21 19 35 M8/ø 9 35 M8 18 38 85 1200 VdS, UL
21 19 35 M6/ø 7 35 M8 18 38 85 1200 UL
TK 10 29 21 45 M8/ø 9 41 M10 23 50 145 2500 VdS, UL
29 21 45 M6/ø 7 41 M10 23 50 145 2500 UL
TKN 10 23 21 42 M10/ø 11 41 M10 20 44 143 2500 VdS, UL, FM
TK 12 32 23,5 54 M12/ø 13 48 M10 26 58 216 3500 VdS, UL, FM
TK 16 26 29,5 58 M10, M12,
M16 / ø 11,
ø 13, ø 17
55 M12 28 58 335 5500 VdS, UL, FM
TKC 44 55 78 ø 13 55 M12 45 71,5 551 3500 -

APPLICATIONS

Our type TK and TKN beam clamps can be mounted with the tensile direction against the retaining screw or against the support. Please see our mounting instructions for further information.

PACKAGING:
50 pcs in box or according to customer specification
MATERIAL:
Malleable cast iron body, general tolerances as per DIN EN ISO 8062-3 CT8
SCOPE OF SUPPLY:
Mounted with DIN 933 8.8 hex bolt, end with cup point (CP) as per EN ISO 4753 and DIN 439 lock nut
SURFACE FINISH:
Galvanised as per DIN EN ISO 4042, on request hot-dip galvanised as per DIN EN ISO 1461, or also coated with zinc flake (e.g. Geomet)

All of the dimensions stated above are approximate and may deviate both upwards and downwards.

up