Wing screws
DIN 316 | Malleable cast iron head with steel shank
- Radiuses acc. to DIN 316, i.e. ergonomic wings, no sharp edges
- Complete range M4x8 – M16x60 available while stocks last
- On request: Special lengths up to 300 mm, with partial thread, with special thread ends or with washer
- See also separate product sheet "Special wing screws"
Packaging:
Standard or according to customer specification
Material:
Malleable cast iron head, EN-GJMB-350-10 acc. to DIN EN 1562, steel shank min. quality 4.6, non-plated, zinc-plated, nickel-plated acc. to DIN EN ISO 4042 On request: Stainless steel A2 or A4, surface pickled, passivated
Tolerance:
Metric thread 6 h (non-plated 6 g) acc. to DIN EN ISO 965-1
| DIMENSIONS in mm | ||||||||
|---|---|---|---|---|---|---|---|---|
| HEAD | d1 | M4 | M5 | M6 | M8 | M10 | M12 | M16 |
| d2 | 7,0 | 9,5 | 11,5 | 14,5 | 18,5 | 21,5 | 27,5 | |
| e | 20,0 | 25,0 | 31,5 | 37,0 | 49,5 | 63,5 | 71,5 | |
| g | 1,5 | 1,9 | 1,9 | 2,4 | 4,0 | 4,5 | 6,0 | |
| h | 9,5 | 12,0 | 16,0 | 19,0 | 24,0 | 32,3 | 36,3 | |
| m | 3,9 | 5,3 | 6,5 | 8,3 | 10,0 | 12,0 | 15,0 | |
| r | 3 | 4 | 5 | 6 | 8 | 10,0 | 11,0 | |
| LENGTH | pieces/box | |||||||
| 8 | 200 | 200 | 200 | - | - | - | - | |
| 10 | 200 | 200 | 200 | 100 | - | - | - | |
| 12 | 200 | 200 | 100 | 100 | - | - | - | |
| 16 | 200 | 200 | 100 | 100 | 50 | 20 | - | |
| 20 | 200 | 200 | 100 | 100 | 50 | 20 | - | |
| 25 | 200 | 200 | 100 | 100 | 50 | 20 | - | |
| 30 | 200 | 100 | 100 | 100 | 50 | 20 | 10 | |
| 35 | 200 | 100 | 100 | 100 | 50 | 20 | - | |
| 40 | 200 | 100 | 100 | 50 | 50 | 20 | 10 | |
| 45 | - | 100 | 100 | 50 | - | 20 | - | |
| 50 | - | 100 | 100 | 50 | 20 | 20 | 10 | |
| 60 | - | 100 | 100 | 50 | 20 | 20 | 10 | |
| 70 | - | - | 50 | 50 | 20 | 20 | - | |
| 80 | - | - | 50 | 50 | 20 | 20 | 10 | |
All of the dimensions stated above are approximate and may deviate both upwards and downwards.