Beam Clamps with U-Bolt | TO FIX STRUT CHANNELS TO I-BEAMS WITHOUT DRILLING AND WELDING
NEW IN OUR PRODUCT RANGE! - AVAILABLE NOW
- Completely pre-installed mounting kit with plate, hexagon nuts and washers
- U-Bolt for centring the strut channel
- The strut channel can be adjusted even after installing the beam clamps
|Beam clamps with U-bolt||VE|
|Model||H (mm)||M||SW (mm)||Palette|
|BTK 110||41/21- 41/41||110||M10||17||10||1400|
|BTK 150||41/62- 41/83||150||M10||17||10||1400|
The following safe working loads “F” apply for BTS beam clamps with U-Bolt and strut channels for static load. Beam clamps have to be used always in pairs (like shown in the picture on the left side).
The maximum safe working load of the used strut channel has to be observed. BTS provides no guarantee for the safe working loads of the channel.
|Modell||T (Nm)||Max. beam thickness FT (mm)||F (N)|
Steel min. hardness 130 HB
Scope of delivery:
U-Bolt, base plate, 2 hexagon nuts, 2 washers
Zinc-plated acc. to DIN EN ISO 4042, hot-dip galvanised
All of the dimensions stated above are approximate and may deviate both upwards and downwards.